Want to Pass 70-680 Exam In Next HOURS? Download Now →
January 11, 2018

Resources to 70 680 pdf


Free Instant Download NEW 70-680 Exam Dumps (PDF & VCE):
Available on: https://www.certshared.com/exam/70-680/


Q111. - (Topic 4) 

A company has client computers that run Windows 7 Enterprise. 

You need to ensure that Windows does not display notifications when programs try to install software or make changes to the computer, or if users make changes to Windows settings. 

Which two choices should you use to achieve this goal? (Each correct answer presents a complete solution. Choose two.) 

A. the leads command 

B. the netsh command 

C. share permissions 

D. Device Manager 

E. Local Users and Groups 

F. the folder Properties window 

G. the Services management console 

H. the Group Policy management console 

I. the User Account Control Settings Control Panel window 

Answer: H,I 


Q112. DRAG DROP - (Topic 4) 

A company has client computers that run windows vista. 

You need to install Windows 7 on a client computer in a dual-boot configuration with the existing Windows Vista installation, without reducing the size of the partition that contains Windows Vista. 

Which actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.) 

Answer: 


Q113. - (Topic 2) 

Your network contains a public computer that runs Windows 7. Multiple users log on to the computer by using a local user account named User1. 

Users report that they can log on to some secure Web sites by using credentials that were saved by other users. 

You need to prevent forms-based credentials from being saved on the computer. 

What should you do? 

A. Remove all generic credentials from Windows Vault. 

B. Remove all Windows credentials from Windows Vault. 

C. Modify the Windows Internet Explorer certificates settings. 

D. Modify the Windows Internet Explorer AutoComplete settings. 

Answer:

Explanation: 

AutoComplete settings AutoComplete is a feature in Internet Explorer that remembers the information you have typed into the Address bar, web forms, or password fields, and which automatically fills in that information if you start to type the same thing again later. This saves you from having to type the same information over and over. 


Q114. - (Topic 3) 

You have a computer that runs Windows 7. 

You need to configure system image backups to meet the following requirements: 

. Automatically create a system image every day without user intervention 

. Retain multiple copies of the system image 

Which type of backup destination should you use? 

A. External hard disk drive 

B. Network location 

C. USB flash drive 

D. Writeable DVD 

Answer:

Explanation: Explanation/Reference: Backup And Restore in Windows 7 supports backing up data files to CD-ROM, DVD-ROM, hard disk (including VHD files), or a network location. You can use Backup And Restore to write a System Image backup to an internal hard disk drive, an external hard disk drive (if formatted with the NTFS file system) and a network location. You cannot use Backup And Restore to write a System Image backup to a USB flash drive, a writable DVD, or a tape drive. You need to schedule client computers that store important data for automatic backup. After you first configure automatic file backup using the Backup And Restore console, Windows 7 regularly backs up your files. The first time a backup is performed, a full backup is done, including all important user documents. Subsequent backups are incremental, backing up only changed files. Older backups are discarded if the disk begins to run out of space.Scheduling Backups with the Backup And Restore Console Windows 7 Backup uses shadow copies to take a snapshot of your files, allowing the backup to completely back up files even if they are open. Backups are configured and scheduled by using the Backup And Restore console under System And Security in Control Panel. You can select the following types of backup destination: An external hard drive External hard drives are more expensive to purchase than internal hard drives, although you need to balance this against the cost of fitting the internal drive. They can be removed and stored in a secure location. However, they are typically slower than internal hard drives and tend to be less reliable, mainly because they are by default formatted using FAT rather than NTFS. You cannot use an external hard drive for a System Image backup unless you convert its filing system to NTFS. Because it is easily removable, it is more likely that an external hard drive will be missing when a scheduled backup is required. 

Network locationIf your computer is short of disk space, you can back it up to a network location on another computer or network storage. Note that this is not the same as the situation in a production environment, where users' Documents libraries are stored on a file server and an administrator backs up the file server. You can save your backups on a network location only on computers running Windows 7 Professional, Windows 7 Ultimate, and Windows 7 Enterprise, and you need to provide credentials so that Windows Backup can access the network. Bear in mind that you can save your backups on a network location only on computers running Windows 7 Professional, Windows 7 Ultimate, and Windows 7 Enterprise.USB flash drivesFlash drive memory is considerably less expensive and flash drive devices support much more memory than they did three or even two years ago. Nevertheless, they typically support a lot less memory than hard drives and quickly fill up if you needed to keep copies of older backups. You cannot save System Image backups to flash memory. A flash drive must be able to hold more than 1 GB if you want to save a backup on it. Flash drives can be stored offsite and are small and easy to carry. They are also easy to lose. 


Q115. HOTSPOT - (Topic 4) 

A company is upgrading its client computers from Windows XP to Windows 7. You add an application to the Windows 7 base image. 

The menu on the title bar of the application is not displayed properly, although other graphical elements are displayed correctly. 

You need to ensure that the application's menu is displayed correctly on client computers that run Windows 7. 

Which option should you choose to achieve this goal? (To answer, select the appropriate check box in the dialog box.) 

Answer: 


Q116. - (Topic 5) 

You use a computer that has Windows 7 SP1 installed. The computer has a shared folder named C:\\Software. 

User1 is a local user account on the computer. The account is a member of several groups that have access to the C:\\Software folder. 

You need to verify whether User1 can save files to C:\\Software. 

What should you do? 

A. Run the Net Share command. 

B. Run the Wfs C:\\Software command. 

C. In the Advanced Security Settings for the Documents folder, select the Effective Permissions tab. 

D. Run the Fsutil C:\\Software command. 

Answer:

Explanation: To view effective permissions on files and folders . Open Windows Explorer, and then locate the file or folder for which you want to view effective permissions. 

Right-click the file or folder, click Properties, and then click the Security tab. 

Click Advanced, click the Effective Permissions tab, and then click Select. 

In Enter the object name to select (examples), enter the name of a user or group, and then click OK. The selected check boxes indicate the effective permissions of the user or group for that file or folder. 


Q117. - (Topic 1) 

You have a reference computer that runs Windows 7. 

You plan to create an image of the computer and then deploy the image to 100 computers. 

You need to prepare the reference computer for imaging. 

What should you do before you create the image? 

A. Run Package Manager. 

B. Run the System Preparation tool. 

C. Install the User State Migration Tool. 

D. Install Windows Automated Installation Kit. 

Answer:

Explanation: 

Sysprep Sysprep is a tool designed for corporate system administrators, OEMs, and others who need to deploy the Windows. XP operating system on multiple computers. After performing the initial setup steps on a single system, you can run Sysprep to prepare the sample computer for cloning. Sysprep prepares the image for capture by cleaning up various user-specific and computer-specific settings, as well as log files. The reference installation now is complete and ready to be imaged. 


Q118. DRAG DROP - (Topic 4) 

You support desktop computers that have Windows 7 Enterprise installed. All computers are configured with system protection on drive C and with a backup task that runs daily at midnight. 

One of the users reports that in the morning she has installed a new version of a browser. After the installation, a follower that has favorite shortcuts was replaced with new content. 

You need to restore the most recent version of the folder that contains the user data. 

What should you do? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order). 

Answer: 


Q119. - (Topic 2) 

An employee who works from home telephones your help desk. A virus attack has deleted his computer's single internal hard disk. He carried out a System Image backup on his computer three months ago and automatically backs up his personal files every night. He uses an external USB hard drive formatted with the NTFS file system to hold his backups. 

All his personal files are in his Documents library. What do you advise? (Choose all that apply; the answers form a complete solution.) 

A. Carry out a System Image restore. 

B. Carry out a system restore. 

C. Use Restore Previous Versions to restore his Documents library from a shadow copy. 

D. Use Restore My Files in the Backup And Restore console to restore his Documents library folder. 

Answer: A,D 


Q120. - (Topic 5) 

You use a portable computer that has Windows 7 installed. The computer has a single hard disk drive and a dual-core CPU. 

You need to analyze the performance of the computer to meet the following requirements: 

Include the CPU, Memory, and Disk subsystems. 

Display real-time performance. 

Obtain a list of users who have logged on by using the same tool. 

What should you do? 

A. Run powercfg.exe. 

B. Run the Windows Experience Index. 

C. Configure Event Viewer subscriptions. 

D. Open Task Manager. 

E. Open System Properties, and configure performance settings. 

F. Open System Properties, and configure environment variables. 

G. Open System Properties, and configure user profiles settings. 

H. Open System Properties, and configure the page file settings. 

I. Open Performance Monitor, and configure a Data Collector Set. 

J. Open Performance Monitor, and customize the System Monitor view. 

Answer: